Items where Subject is "Engineering"

Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | X | Y | Z
Number of items at this level: 101.

A

Abaranji, Sujatha and Panchabikesan, Karthik and Ramalingam, Velraj (2022) Direct Evaporative Cooling System for Year-Round Thermal Management with Solar Assisted Dryer: An Experimental Investigation. In: Novel Perspectives of Engineering Research Vol. 10. B P International, pp. 16-42. ISBN 978-93-5547-282-3

Abazid, Mohammad and Gökçekuş, Hüseyin and Çelik, Tahir and Velmurugan, Palanivel (2021) Implementation of TQM and the Integration of BIM in the Construction Management Sector in Saudi Arabia. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Abdel-Wahab, A. M. and Malek, O. M. (2023) Managing the Engineering Projects through the GIS Tools: A Recent Study. In: Techniques and Innovation in Engineering Research Vol. 9. B P International, pp. 71-87. ISBN 978-81-19102-65-5

Abdullah Hamad, Abdulsattar and Lellis Thivagar, M. and Bader Alazzam, Malik and Alassery, Fawaz and Mahmood Khalil, Muayyad and Ramesh, V. and Meraf, Zelalem and Kumar, Vishal and Velmurugan, Palanivel (2021) Dynamic Systems Enhanced by Electronic Circuits on 7D. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Abubakar, Alkasim and Barnabas, Maigida H. and Tanko, Baba M. (2018) The Physico-Chemical Composition and Energy Recovery Potentials of Municipal Solid Waste Generated in Numan Town, North-Eastern Nigeria. Energy and Power Engineering, 10 (11). pp. 475-485. ISSN 1949-243X

Adarsha, H. and Venkadeshwaran, K. and Deepak, J. and Beemkumar, N. (2021) An Insight to Automobile Safety Systems. In: New Approaches in Engineering Research Vol. 11. B P International, pp. 53-64. ISBN 978-93-91882-95-2

Agebure, Andrews Baba and Amedorme, Sherry Kwabla and Johnson, Amoanab Norbert (2023) Causes and Strategies for Reducing Road Traffic Accidents in the Bongo District of Ghana. Journal of Engineering Research and Reports, 25 (9). pp. 166-178. ISSN 2582-2926

Ahmad, Naushad and Ali Alghamdi, Abdulaziz and AL-Abdulkarim, Hessah A. and Mustafa, Ghulam M. and Baghdadi, Neazar and Alharthi, Fahad A. (2021) Structural, Morphological, and Electrochemical Performance of CeO2/NiO Nanocomposite for Supercapacitor Applications. Applied Sciences, 11 (1). p. 411. ISSN 2076-3417

Al-Awag, Eman Ali and Wahab, Izudinshah Abd (2023) Double-Skin Facades: Advantages, Disadvantages, and Design Considerations. In: Techniques and Innovation in Engineering Research Vol. 9. B P International, pp. 146-157. ISBN 978-81-19102-65-5

Al-Shaalan, Abdullah M. (2018) Anticipated Actions to Reduce Energy Shortages in the Residential Sector. Energy and Power Engineering, 10 (09). pp. 434-447. ISSN 1949-243X

Alkasim, A. and Hayatu, A. A. and Salihu, M. K. (2018) Estimation of Land Surface Temperature of Yola, North Eastern Nigeria Using Landsat-7 ETM+ Satellite Image. Energy and Power Engineering, 10 (10). pp. 449-456. ISSN 1949-243X

Antivachis, Michael and Dietz, Flurin and Zwyssig, Christof and Bortis, Dominik and Kolar, Johann W. (2021) Novel High-Speed Turbo Compressor With Integrated Inverter for Fuel Cell Air Supply. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Arruda, M. R. T. and Castro, Luís (2024) State of art for hybrid mixed finite element formulation in non-linear analysis of structures. Engineering Solid Mechanics, 12 (1). pp. 51-64. ISSN 22918744

Arun Kumar, G. and Lakshmisankar, S. (2021) Automated Guided Vehicle for Physically Handicapped People – A Cost Effective Approach. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 130-139. ISBN 978-93-90768-21-9

Aust, Jonas and Shankland, Sam and Pons, Dirk and Mukundan, Ramakrishnan and Mitrovic, Antonija (2021) Automated Defect Detection and Decision-Support in Gas Turbine Blade Inspection. Aerospace, 8 (2). p. 30. ISSN 2226-4310

B

Bai, Hao and Li, Ruidong and Hu, Xiangyu and Chen, Fei and Liao, Zhiyong and Yao, Yongsheng (2021) Automated Shape Analysis and DEM Study on Graded Crushed Stone. Advances in Materials Science and Engineering, 2021. pp. 1-14. ISSN 1687-8434

Balasubramanyam, M. (2021) Study on Critical Failures in Power Systems: Design of IT Based Model and Implementation of SPS in Andra Pradesh State Utility. In: New Approaches in Engineering Research Vol. 11. B P International, pp. 42-52. ISBN 978-93-91882-95-2

Basariya, S. Rabiyathul and Ahamed, Ramyar Rzgar (2020) Assessment of Online Promotion as a Coping Strategy for Career Plateau. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 33-39. ISBN 978-93-90206-88-9

Bharadwaja, P. V. S. R. and Naresh, M. Venkata and Koppala, Neelima and Krishna, J. Sai (2020) Research on the Design of Step-up Inexact MAC (IMAC) Unit for DSP Applications. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 23-32. ISBN 978-93-90206-88-9

Biney, Evans and Akortia, Vincent K. and Kankam, Charles K. and Junior, John K. Quarm and Adzakey, Peter (2022) Assessing Structural Performance of Ceramic Waste as Partial Replacement of Coarse Aggregate on Properties of Concrete. Journal of Engineering Research and Reports, 23 (12). pp. 134-147. ISSN 2582-2926

Borges, Gabriel and Salvaro, Diego and Binder, Roberto and Binder, Cristiano and Klein, Aloisio N. and de Mello, Jose D. B. (2021) In situ Tribo-Fluorination for Oil-Less Hermetic Compressor Applications. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

C

Campos, Luís M. B. C. and Marques, Joaquim M. G. (2021) On Probabilistic Risk of Aircraft Collision along Air Corridors. Aerospace, 8 (2). p. 31. ISSN 2226-4310

Castel, Christophe and Bounaceur, Roda and Favre, Eric (2021) Membrane Processes for Direct Carbon Dioxide Capture From Air: Possibilities and Limitations. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Chen, Sibin and Jiang, Hao and Xing, Huitang and Wang, Jing and Huang, Yongliang and Wei, Guangbin and Zhang, Yijie and Hou, Dongshuai and Tang, Shengwen (2021) Research on Preparation and Performance of Clay-Based Shield Tunnel Nonsintered Bricks. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

Chengwei, Liu and Jiahao, Feng and Cunwu, He and Pengyan, Guo (2022) A Study on the Current status of Metal Bipolar Plate Materials and Stamping and Forming for Fuel Cells. Journal of Engineering Research and Reports, 23 (9). pp. 29-40. ISSN 2582-2926

Chupradit, Supat and Raya, Indah and Ngoc Huy, Dinh Tran and Bokov, Dmitry and Van Tuan, Pham and Surendar, Aravindhan and Lafta, Doaa Alaa and Kadhim, Mustafa M. and Kravchenko, Olga and Mustafa, Yasser Fakri and Mahmood, Zaid Hameed and Sajjadifar, Sami and Kou, Hongchao (2021) Role of Glass Composition on Mechanical Properties of Shape Memory Alloy-Metallic Glass Composites. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Cifrian, Eva and Dacuba, Juan and Llano, Tamara and Díaz-Fernández, María del Carmen and Andrés, Ana (2021) Coal Fly Ash–Clay Based Geopolymer-Incorporating Electric Arc Furnace Dust (EAFD): Leaching Behavior and Geochemical Modeling. Applied Sciences, 11 (2). p. 810. ISSN 2076-3417

Coletta, Riccardo and Mussi, Elisa and Uccheddu, Francesca and Volpe, Yary and Morabito, Antonino (2021) Preoperative Planning of Spiral Intestinal Lengthening and Tailoring: A Geometrical Approach. Bioengineering, 8 (2). p. 20. ISSN 2306-5354

Cung, Khanh Duc and Moiz, Ahmed Abdul and Zhu, Xiucheng and Lee, Seong-Young (2021) Ignition Process and Flame Lift-Off Characteristics of dimethyl ether (DME) Reacting Spray. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

D

Dadile, A. M. and Sotannde, O. A. (2021) Evaluation of Indigenous Knowledge and Fuel Value Index of Some Selected Sudano-Sahelian Fuelwood Species in Damaturu, Yobe State of Nigeria. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 120-129. ISBN 978-93-90768-21-9

Dan, Gao and Linfeng, Wu and Kaiqin, Hu and Zheng, Wang (2024) Simulation of Screening Performance of Linear Vibrating Screen for Sand Sorting Based on Discrete Element Method. Journal of Engineering Research and Reports, 26 (2). pp. 60-68. ISSN 2582-2926

Dinesh, D. and Megalingam, A. and Rajamurugan, G. and Arundeep, M. and Tajdeen, A. (2021) Wear and Microstructure Characteristics of Friction Stir Processed Al6063/B4C+SiO2 Composites. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 140-150. ISBN 978-93-90768-21-9

Dong, Xin and Mei, Ling and Yang, Shuyan and He, Liang and Giorgio, Ivan (2021) Deformation Response Research of the Existing Subway Tunnel Impacted by Adjacent Foundation Pit Excavation. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Duraisamy, M. and Singh, W. Jai (2020) Deducting of Prickle Noise from Satellite Galaxy Images. In: Emerging Trends in Engineering Research and Technology Vol. 2. B P International, pp. 138-144. ISBN 978-93-89816-99-0

E

Edemumoh, Emmanuel E. and Uwanta, Emaime J. and Awaka-Ama, Joachim J. and Udo, Godwin J. and Etukudo, Nsikan J. and Nyong, Aniedi E. and Igwe, Raphael and Okon, Christiana P. and Abasi, Elvis O. (2024) Structural and Morphological Analysis of Untapped Clay Deposits in Itu Local Government Area Akwa Ibom State, Nigeria and its Potentials as Raw Material for Petroleum Refining. Journal of Engineering Research and Reports, 26 (2). pp. 131-144. ISSN 2582-2926

F

Fang, Juan and Luo, Maochun and Wang, Jiqiang and Hu, Zhongzhi (2021) FMI-Based Multi-Domain Simulation for an Aero-Engine Control System. Aerospace, 8 (7). p. 180. ISSN 2226-4310

Firdaus, Muhammad and Rhee, Kyung-Hyune (2021) On Blockchain-Enhanced Secure Data Storage and Sharing in Vehicular Edge Computing Networks. Applied Sciences, 11 (1). p. 414. ISSN 2076-3417

Förster, Stanley and Schultz, Michael and Fricke, Hartmut (2021) Probabilistic Prediction of Separation Buffer to Compensate for the Closing Effect on Final Approach. Aerospace, 8 (2). p. 29. ISSN 2226-4310

G

Garcia, A. and Trujillo, J. and Jurado, J. F. (2020) Studies Effect on Structural Relaxation of the x(AgI+KI)+(1-x)NH4I System Base on Thermal Measurements: New Perspectives. In: Emerging Trends in Engineering Research and Technology Vol. 2. B P International, pp. 155-161. ISBN 978-93-89816-99-0

Gonzalez-Gil, Graciela and Behzad, Ali Reza and Farinha, Andreia S. F. and Zhao, Chengyan and Bucs, Szilard S. and Nada, Tariq and Das, Ratul and Altmann, Thomas and Buijs, Paulus J. and Vrouwenvelder, Johannes S. (2021) Clinical Autopsy of a Reverse Osmosis Membrane Module. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Guo, Fei and Du, Chengbin and Yu, Guojun and Hay, Rotana (2021) The Normal Force Characteristic of a Novel Magnetorheological Elastomer Based on Butadiene Rubber Matrix Compounded with the Self-Fabricated Silly Putty. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

H

Hema, L. K. and Priya, R. Mohana and Shunmuganathan, K. L. and Velmurugan, S. (2021) Recent Study on Design and Development of a Wearable Device to Monitor Vital Signs of Preggers. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 151-158. ISBN 978-93-90768-21-9

I

Ikamas, Kęstutis and But, Dmytro B. and Lisauskas, Alvydas (2021) Homodyne Spectroscopy with Broadband Terahertz Power Detector Based on 90-nm Silicon CMOS Transistor. Applied Sciences, 11 (1). p. 412. ISSN 2076-3417

J

Jenish, I. and Felix Sahayaraj, A. and Appadurai, M. and Fantin Irudaya Raj, E. and Suresh, P. and Raja, T. and Salmen, Saleh H. and Alfarraj, Saleh and Manikandan, Velu and Ares, Alicia E. (2021) Fabrication and Experimental Analysis of Treated Snake Grass Fiber Reinforced with Polyester Composite. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

K

Kaur, Amandeep and Gupta, Anuj Kumar (2020) Supervised Linear Estimator Modeling (SLEMH) for Health Monitoring: Recent Perspectives. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 1-9. ISBN 978-93-90206-88-9

Kharouf, Naji and Sauro, Salvatore and Jmal, Hamdi and Eid, Ammar and Karrout, Mohamed and Bahlouli, Nadia and Haikel, Youssef and Mancino, Davide (2021) Does Multi-Fiber-Reinforced Composite-Post Influence the Filling Ability and the Bond Strength in Root Canal? Bioengineering, 8 (12). p. 195. ISSN 2306-5354

Kharouf, Naji and Sauro, Salvatore and Jmal, Hamdi and Eid, Ammar and Karrout, Mohamed and Bahlouli, Nadia and Haikel, Youssef and Mancino, Davide (2021) Does Multi-Fiber-Reinforced Composite-Post Influence the Filling Ability and the Bond Strength in Root Canal? Bioengineering, 8 (12). p. 195. ISSN 2306-5354

Kharouf, Naji and Sauro, Salvatore and Jmal, Hamdi and Eid, Ammar and Karrout, Mohamed and Bahlouli, Nadia and Haikel, Youssef and Mancino, Davide (2021) Does Multi-Fiber-Reinforced Composite-Post Influence the Filling Ability and the Bond Strength in Root Canal? Bioengineering, 8 (12). p. 195. ISSN 2306-5354

Kudari, Suvan S. and Bharatish, A. (2023) Optimization of Brake Disc Profile Based on the Thermal Performance for Electric Vehicles. Journal of Engineering Research and Reports, 25 (2). pp. 48-63. ISSN 2582-2926

Kulkarni, Harshit B. (2022) Study on the Effect of Nozzle Angle and Air Flow Rate during Nanofluid Minimum Quantity Lubrication Milling of Aerospace Alloy Al7075-T6. In: Novel Perspectives of Engineering Research Vol. 10. B P International, pp. 1-10. ISBN 978-93-5547-282-3

Kumar, D. Mahesh and Jagadeep, T. (2023) Detection of Water Pipeline Leakage and Monitoring System Using Smart Sensor with IoT. In: Techniques and Innovation in Engineering Research Vol. 9. B P International, pp. 158-168. ISBN 978-81-19102-65-5

Kumar, Praveen and Zhang, Yu and Traver, Michael and Watson, John (2021) Tailored Air-Handling System Development for Gasoline Compression Ignition in a Heavy-Duty Diesel Engine. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

L

Li, Yi-Bo and Sang, Hong-Bao and Xiong, Xiang and Li, Yu-Rou (2021) An Improved Adaptive Genetic Algorithm for Two-Dimensional Rectangular Packing Problem. Applied Sciences, 11 (1). p. 413. ISSN 2076-3417

Licciardello, Michela and Ciardelli, Gianluca and Tonda-Turo, Chiara (2021) Biocompatible Electrospun Polycaprolactone-Polyaniline Scaffold Treated with Atmospheric Plasma to Improve Hydrophilicity. Bioengineering, 8 (2). p. 24. ISSN 2306-5354

Lin, Yu-Hsien and Lin, Yu-Ting and Chiu, Yen-Jun (2021) Stability and Manoeuvrability Simulation of a Semi-Autonomous Submarine Free-Running Model SUBOFF with an Autopilot System. Applied Sciences, 11 (1). p. 410. ISSN 2076-3417

Llorente, Amaia and Serrano, Berna and Baselga, Juan and Gedler, Gabriel and Ozisik, Rahmi (2020) Assessment of Jet Milling as an Alternative Processing Technique for Preparing Polysulfone Hard Nanocomposites. In: Recent Developments in Engineering Research Vol. 10. B P International, pp. 76-88. ISBN 978-93-90516-95-7

M

M., Bebelede S. and J., Ijabo O. and J., Awulu O. (2023) Influence of Temperature and Length of Storage on the Heat of Respiration of Cocoyam Varieties during Storage. Journal of Engineering Research and Reports, 25 (12). pp. 1-13. ISSN 2582-2926

Ma, Chaoyi and Zhu, Zhengguo and Fang, Zhichun and Li, Zhaobin and Liu, Liu and Gallo, Pasquale (2021) Optimal Proportion of Similar Materials and Rockburst Tendency of White Sandstone. Advances in Materials Science and Engineering, 2021. pp. 1-17. ISSN 1687-8434

Maati, Essaid Ait El and Radouane, Abdelhadi and Mouhsen, Azeddine (2020) Modeling and Control of Autonomous Photovoltaic System: Comparative Study the Fuzzy Logic and P&O Associated to PI Controller Algorithms Using SEPIC Converter for Maximum Power Point Tracking. In: Recent Developments in Engineering Research Vol. 10. B P International, pp. 104-116. ISBN 978-93-90516-95-7

Madhusudan, M. and Shanmuganatan, S. P. and Shridhar, Kurse and John, Jacob and Krishnamurthy, R. and Sasikumar, Bashyam and Vijayan, V. (2021) Investigation on Friction Stir Weldability Characteristics of AA7075-T651 and AA6061-T6 Based Nanocomposites. Advances in Materials Science and Engineering, 2021. pp. 1-19. ISSN 1687-8434

Malik, Sapna and Sharma, Parul (2020) Plot and Property Management (PPM): An Initiative for Smart City Implementation Using ICT. In: Emerging Trends in Engineering Research and Technology Vol. 2. B P International, pp. 119-126. ISBN 978-93-89816-99-0

Mallis, Panagiotis and Sokolis, Dimitrios P. and Katsimpoulas, Michalis and Kostakis, Alkiviadis and Stavropoulos-Giokas, Catherine and Michalopoulos, Efstathios (2021) Improved Repopulation Efficacy of Decellularized Small Diameter Vascular Grafts Utilizing the Cord Blood Platelet Lysate. Bioengineering, 8 (9). p. 118. ISSN 2306-5354

Manoli, Nandini N. and Kotla, Bhavya (2021) An Advanced Concept in Thyroid Cytology with Special Emphasis on Ancillary Techniques. In: Highlights on Medicine and Medical Science Vol. 10. B P International, pp. 53-65. ISBN 978-93-91312-59-6

Metz, Isabel C. and Ellerbroek, Joost and Mühlhausen, Thorsten and Kügler, Dirk and Hoekstra, Jacco M. (2021) Analysis of Risk-Based Operational Bird Strike Prevention. Aerospace, 8 (2). p. 32. ISSN 2226-4310

Miao, Jiafeng (2024) Analysis of Laminated Composite Based Deep-water Pressure Tank. Journal of Engineering Research and Reports, 26 (5). pp. 127-137. ISSN 2582-2926

Mmonwuba, N. C. and Patrick, Ezenwaka and Elochukwu Caleb, Chukwu (2023) The Design of Sewage Treatment Plant for Agulu Community, Nigeria. Journal of Engineering Research and Reports, 24 (4). pp. 1-7. ISSN 2582-2926

Muller, B. and Koyuturk, E. and Goncu, D. (2021) An Investigation of Spatial Energy Distribution in a Harmonic Oscillator and the Golden Section. In: New Approaches in Engineering Research Vol. 11. B P International, pp. 30-41. ISBN 978-93-91882-95-2

N

Ndubuisi, Ifeanyi A. and Nweze, Julius E. and Onoyima, Nnaemeka J. and Yoshinori, Murata and Ogbonna, James C. (2018) Ethanol Production from Cassava Pulp by a Newly Isolated Thermotolerant <i>Pichia kudriavzevii</i> LC375240. Energy and Power Engineering, 10 (10). pp. 457-474. ISSN 1949-243X

O

O. A., Olojede and J. I., Igbokwe and A. O., Oliha and W. A., Ojanikele (2023) Mapping and Modelling of Urban Landscape of Osogbo Metropolis, Osun State Nigeria, Using Artificial Neural Network. Journal of Engineering Research and Reports, 25 (11). pp. 88-98. ISSN 2582-2926

O. A., Oyegunwa and I. T., Adejugbe and I. T., Olorunsola and J. A., Olowonubi, and J. O., Aigbovbiosa and O., Komolafe and A. K., Ogunkoya, (2023) Design and Development of a Sorghum Winnowing Machine. Journal of Engineering Research and Reports, 25 (10). pp. 40-46. ISSN 2582-2926

Osborn, Mark J. and Bhardwaj, Akshay and Bingea, Samuel P. and Knipping, Friederike and Feser, Colby J. and Lees, Christopher J. and Collins, Daniel P. and Steer, Clifford J. and Blazar, Bruce R. and Tolar, Jakub (2021) CRISPR/Cas9-Based Lateral Flow and Fluorescence Diagnostics. Bioengineering, 8 (2). p. 23. ISSN 2306-5354

P

Patil, Pritesh A. and Deshpande, R. S. (2022) Study about Collaborative Optimized Routing Algorithm Based Optimized and Secure Routing in WSN. In: Novel Perspectives of Engineering Research Vol. 10. B P International, pp. 63-77. ISBN 978-93-5547-282-3

Prayudyanto, Muhammad Nanang and Thohir, Muiz and Belka, Stefan (2021) Will Indonesia's Bus Subsidy Be Sustainable? In: Advanced Aspects of Engineering Research Vol. 10. B P International, pp. 1-9. ISBN 978-93-90888-93-1

R

R., Abhigna and Shinde, Amith K. and Sundaresh, Ashwin and R., Dheeraj P. and Vijaya, P. A. (2020) Sole Mate an Applicative Approach: Safe Pathfinding by Obstacle Detection and Distance Estimation for the Blind. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 40-49. ISBN 978-93-90206-88-9

Raghavendra Rao, R. and Pradeep, S. and Hasan, Nasim and Shivashankara, B. S. and Elkotb, Mohamed Abdelghany and Ahamed Saleel, C. and Afzal, Asif and Saleh, B. and M, Ravichandran (2021) Comparative Study of the Mechanical and Water Absorption Behaviour of Basalt Fiber Reinforced Polymer Matrix Composites with Different Epoxies as Matrix for Biomedical Applications. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Rahman, Ataur and Hassan, Nurul and Izan, Sany Ihsan (2020) Fuzzy Adaptive Autonomous Electromagnetic 2-Speed Gearbox for Electric Vehicle. In: Recent Developments in Engineering Research Vol. 10. B P International, pp. 41-60. ISBN 978-93-90516-95-7

Rahman, Ataur and Izan, Sany Ihsan (2020) Development of Electro-hydro Autonomous Parking Braking System for Electric Vehicle. In: Recent Developments in Engineering Research Vol. 10. B P International, pp. 61-75. ISBN 978-93-90516-95-7

Rahman, Najeeb Ur and Bahadar, Wasim and Alam, Sultan and Zahoor, Muhammad and Zekker, Ivar and Khan, Farhat Ali and Ullah, Riaz and Ali, Essam A. and Murthy, H. C. Ananda and R, Lakshmipathy (2022) Activated Sawdust-Based Adsorbent for the Removal of Basic Blue 3 and Methylene Green from Aqueous Media. Adsorption Science & Technology, 2022. pp. 1-13. ISSN 0263-6174

Rai, A. K. and Khare, P. K. and Mor, Prashant (2022) Electronic Security System for Agricultural Field. In: Novel Perspectives of Engineering Research Vol. 10. B P International, pp. 11-15. ISBN 978-93-5547-282-3

Rakesh, K. M. and Srinidhi, Ramachandracharya and Gokulkumar, S. and Nithin, K. S. and Madhavarao, S. and Sathish, S. and Karthick, Alagar and Muhibbullah, M. and Osman, Sameh M. and Kri k, ubo (2021) Experimental Study on the Sound Absorption Properties of Finger Millet Straw, Darbha, and Ripe Bulrush Fibers. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

S

Sadik, Shalom (2018) Temperature Oscillations into a Couette-Poiseuille Flow. Energy and Power Engineering, 10 (09). pp. 414-433. ISSN 1949-243X

Safari, Hamid and Karevan, Mehdi and Nahvi, Hassan (2023) Fracture toughness evaluation of zeolite/polyurethane-filled woven panels. Engineering Solid Mechanics, 11 (3). pp. 325-338. ISSN 22918744

Salehizadeh, Hamed and Hakes, Raquel S. P. and Gollner, Michael J. (2021) Critical Ignition Conditions of Wood by Cylindrical Firebrands. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Salmasi, Farzin and Abraham, John (2022) Drainage Gallery in Concrete Gravity Dams and Its Effect on Reduction of Uplift Forces. In: Novel Perspectives of Engineering Research Vol. 10. B P International, pp. 43-62. ISBN 978-93-5547-282-3

Selvaraj, Senthil Kumaran and Sundaramali, G. and Jithin Dev, S. and Srii Swathish, R. and Karthikeyan, Rahul and Vijay Vishaal, K. E. and Paramasivam, Velmurugan and Kara, Fuat (2021) Recent Advancements in the Field of Ni-Based Superalloys. Advances in Materials Science and Engineering, 2021. pp. 1-60. ISSN 1687-8434

Sharanya, M. and Banakara, Basavaraja and Sasikala, M. (2020) Dynamic Voltage Restorer and Hybrid Active Power Filter for Power Quality Improvement: Comparative Study. In: Emerging Trends in Engineering Research and Technology Vol. 2. B P International, pp. 127-137. ISBN 978-93-89816-99-0

Sharma, Shiva and Mehra, Rajesh (2020) Efficiency Enhancement of Cuprous Thiocyanate and Tin Halide based Perovskite Solar Cell Design. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 10-22. ISBN 978-93-90206-88-9

Shenawy, E. T. El and Hegazy, Aiat (2020) Simple Maximum Power Point Tracker Based on Perturb and Observe Technique for PV Module: Advanced Study. In: Emerging Trends in Engineering Research and Technology Vol. 2. B P International, pp. 145-154. ISBN 978-93-89816-99-0

Shinde, B. R. and Jadhav, K. M. (2021) Ultrasonic Studies of Molecular Interactions in Aqueous Electrolytic Solutions at Different Temperatures. In: New Approaches in Engineering Research Vol. 11. B P International, pp. 1-7. ISBN 978-93-91882-95-2

Srivastava, Sambhrant (2022) Mixed Flow Pump Impeller Reference Book a Guide to Design, Modelling and Analysis. B P International. ISBN 978-93-5547-680-7

Sundari, Yayuk Sri and Purwanto, . and Eswan, . and Hartawan, Dedy Sugi (2023) Prediction of the Extent of Flood Indicators Used from the Slope Map in the River Flow Area in the City of Samarinda, East Kalimantan, Indonesia. Journal of Engineering Research and Reports, 25 (12). pp. 110-115. ISSN 2582-2926

T

Talanin, V. I. and Talanin, I. E. (2021) Vlasov's Physics: From Plasma to Solid. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 114-119. ISBN 978-93-90768-21-9

Tiwari, A. and Tolpekina, T. and Benthem, Hans van and Gunnewiek, M. K. and Persson, B. N. J. (2021) Rubber Adhesion and Friction: Role of Surface Energy and Contamination Films. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Toader, Dumitru and Greconici, Marian and Vesa, Daniela and Tatai, Ildiko (2023) High-Performance Mathematical Models for the Analysis of Single Line-to-Ground Faults in Medium Voltage Electrical Networks. In: Techniques and Innovation in Engineering Research Vol. 9. B P International, pp. 88-145. ISBN 978-81-19102-65-5

Tran, Ngoc-Long and Nguyen, Trong-Ha and Phan, Van-Tien and Nguyen, Duy-Duan and Zheludkevich, Mikhail (2021) A Machine Learning-Based Model for Predicting Atmospheric Corrosion Rate of Carbon Steel. Advances in Materials Science and Engineering, 2021. pp. 1-25. ISSN 1687-8434

U

Umbetov, Abilhan Umbetovich and Umbetova, Makhabbat Zhaksylykovna and Abildayev, Gabit Mukhitovich and Baizakova, Saule Svyazkhanovna and Zhamalova, Samal Arynovna and Konussova, Arailym Boranbayevna and Dosmagulova, Kalamkul Kapenovna (2021) Studies on Transformation and Interference of the Laser Radiation in Composite Crystal Optical Systems. In: New Approaches in Engineering Research Vol. 11. B P International, pp. 8-29. ISBN 978-93-91882-95-2

V

Valenti, Andrea and Barsotti, Michele and Bacciu, Davide and Ascari, Luca (2021) A Deep Classifier for Upper-Limbs Motor Anticipation Tasks in an Online BCI Setting. Bioengineering, 8 (2). p. 21. ISSN 2306-5354

Veeraboina, Punnaiah and Yesuratnam, G. (2020) Advanced Study on Optimal Design & Analysis of Solar Water Heating System Using Solar Factors for Energy Efficiency & Thermal Performance. In: Recent Developments in Engineering Research Vol. 10. B P International, pp. 89-103. ISBN 978-93-90516-95-7

X

Xuebing, Wang and Yahuia, Wang and Huchena, Zhang (2023) Structural and Modal Analysis of the Unloading Robot on the Broaching Machine. Journal of Engineering Research and Reports, 25 (12). pp. 184-193. ISSN 2582-2926

Y

Yamashita, Hiroshi and Yin, Feijia and Grewe, Volker and Jöckel, Patrick and Matthes, Sigrun and Kern, Bastian and Dahlmann, Katrin and Frömming, Christine (2021) Analysis of Aircraft Routing Strategies for North Atlantic Flights by Using AirTraf 2.0. Aerospace, 8 (2). p. 33. ISSN 2226-4310

Z

Zhao, Zhiqing and Caggiano, Antonio (2021) Dynamic Properties Test and Constitutive Relation Study of Lightweight Aggregate Concrete under Uniaxial Compression. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

This list was generated on Fri Apr 19 19:51:03 2024 UTC.